ECOMIX PF is a compact electronic constant temperature control designed to operate 3- and 4-way mixing valves in radiant floor heating, solid fuel and industrial applications.

The supply temperature can be controlled steplessly between 0°C and 99°C. In case of power failure the motor can be controlled manually.

ECOMIX CLIMA works continuously and proportionally. Through data from the supply sensor the motor with built-in electronics controls the valve. The temperature setting will be very accurate.

The quick and easy do-it-your-self installation saves on labor costs.

STANDARD EQUIPMENT:

- Automix CT valve motor 24 VAC 50/60 Hz with built-in electronics;
Mounting kit;
- Supply temperature sensor T1 with fix band and 1 meter wire;
- Adapter 230/18 VAC 190 mA with 1,7 meter wire;
- Mounting and operation instructions.

The rotary electric actuator is mounted on the mixing valve by only one screw.

An anti-rotation bolt is supplied with the rotary electric actuator. The mounting position can be chosen in steps of 90°.

ECOMIX PROPORTIONAL is a compact rotary electric actuator and can be inserted into the most of insulation covering.

The angle of rotation is limited to 90°. When the rotary electric actuator reaches either end position, the voltage supply is interrupted by limit switches. In case of failure by the controller, the rotary electric actuator can be put in to a manual mode by turning the button on the housing cover, which will disengage the gears. The rotary actuator can be used in manual way, acting on the automatic/manual button.

ECOMIX AMB DD2 is a remote control to adjust the room temperature to match the actuator ECOMIX CLIMA.

The rotary electric actuator is mounted on the mixing valve by only one screw.

An anti-rotation bolt is supplied with the rotary electric actuator. The mounting position can be chosen in steps of 90°.

The ECOMIX 230V+AUX is a compact rotary electric actuator and can be inserted into the most of insulation covering.

The angle of rotation is limited to 90°. When the rotary electric actuator reaches either end position, the voltage supply is interrupted by limit switches. In case of failure by the controller, the rotary electric actuator can be put in to a manual mode by turning the button on the housing cover, which will disengage the gears. The rotary actuator can be used in manual way, acting on the automatic/manual button.

The rotary electric actuator is mounted on the mixing valve by only one screw.

An anti-rotation bolt is supplied with the rotary electric actuator. The mounting position can be chosen in steps of 90°.

The ECOMIX 230V is a compact rotary electric actuator and can be inserted into the most of insulation covering.

The angle of rotation is limited to 90°. When the rotary electric actuator reaches either end position, the voltage supply is interrupted by limit switches. In case of failure by the controller, the rotary electric actuator can be put in to a manual mode by turning the button on the housing cover, which will disengage the gears. The rotary actuator can be used in manual way, acting on the automatic/manual button.